Dolphin

Please keep in mind that:

1. Dolphin has not been tested extensively for OoTR.
2. Using Dolphin for racing is against our community's racing rules.

Dolphin is a popular emulator for both Gamecube and Wii games, but it can also be used to play Ocarina of Time Randomizer on thru the Wii's Virtual Console mode. Dolphin is very good at emulating Wii VC and only suffers from slight additional lag in certain areas (such as Market as child), which could be mitigated by increasing the clock rate. However, compared to N64 emulators Dolphin inherits the advantages of faster load times and faster pausing from Wii VC. It's also not as resource intensive as some of the alternatives. That being said, playing OoTR on Dolphin is still largely experimental, and this page will be updated as more issues and fixes for those issues are found.

While Dolphin will be used as a Wii emulator, it is actually much simpler than setting up a Wii. There is no need to softmod, move data onto an SD card, or install a WAD. That being said, there are some steps that need to be taken first.

First Time Dolphin User Set Up

Download the latest beta release of Dolphin. Like other emulators, you will need the latest beta release of Dolphin rather than the latest stable release. Note that, by default, Dolphin will check for a new beta release monthly and auto-update. You will need a version specific to the operating system you use, see below for details.

Windows

Once Dolphin is downloaded, extract the zip and open Dolphin.exe. You should see something like this (except that, if this is your first time, your games list will be empty):

Note the buttons within the red box, these will be used in the upcoming steps. The first thing you will want to do is create a game directory. Go to Config ⇒ Paths ⇒ Add... and select the directory in which you would like your games to be placed. You can even have multiple game directories, if you wish. This will then cause any .iso or .wad files in your selected directory to show up in the home menu, as seen above.

Click on Controllers on the home page. Controllers can be setup either as "GameCube Controllers", or as "Wii Remotes". For the purpose of the randomizer your controller will need to be configured as a "GameCube Controller" (even if it is, say, an Xbox controller). Under Gamecube controllers, click Configure next to Port 1.

If you are using a Gamecube Controller with a Wii U Adapter by either Nintendo or Mayflash (Wii U mode), then your controller should be detected and configured automatically and the new window that opens will simply ask you to enable/disable the Rumble Pak.

For reference, these are the default controller mappings Dolphin will use. Keep in mind that if you've used the webpatcher, or gzinjectgui with the right configuration, that D-pad left/right/down will be overwritten to properly work with boots/ocarina on D-pad.

If you are using any other controller, or if you're using a Gamecube adapter in PC mode, then you will need to configure the controller yourself. Note that, even if you have a controller with analog triggers, you must set L and R for the buttons to work properly, not just L-Analog and R-Analog. Below shows a sample controller config with an Xbox controller.

Mac OS

On the Dolphin page, download the MacOS Intel version and drag to Application folder per normal installation.

The Disk Image (DMG) will include Dolphin and the Dolphin Updater.

Similar to the Windows setup, create a filepath directory to where the WAD will be located.

For setting up controllers, you may use either USB or BlueTooth enabled devices. In the controller setup screen, configure your specific setup and map the button inputs. Virtual notches can be configured in this screen as well.

Randomizer Dolphin Set Up

So, now you have either just finished setting up Dolphin for the first time, or are an experienced Dolphin user. There are a few more settings that must be set to certain values to properly play the randomizer.

First, under Config ⇒ General make sure that Allow Mismatched Region Settings is unchecked and Fallback Region is set to NTSC-J. This ensures that you don't get a PAL frame rate.

Next, under Graphics ⇒ Hacks, ensure that Store EFB Copies to Texture Only is unchecked. This fixes the black pause screens

Starting a Seed

This is the only part of setting up Dolphin which is similar to the set up for Wii VC. Refer to the "Generating a Seed" section on the Wii VC page for how to generate a WAD.

After generating the WAD, place it in your game directory. It should appear in your home menu. Double-clicking the seed should then launch it the same way any other .iso is launched from Dolphin, no NAND installation or Wii channel required. If there is already an in-game save file present, delete it before starting the new seed.

After Finishing a Seed

Since all OoTR WADs use the same internal ID, Dolphin will consider them all the same game, meaning saves will carry over between seeds. You'll just need to delete the old save data to make room for a new save.

Optional Settings

Recommended Baseline Settings

If you are experiencing lag, these are optional settings to change from default.

First, in the Graphics tab, change the Backend in General from OpenGL to Vulcan if you are on Windows. Dolphin recommends switching this driver as there may or may not be performance driven issues using OpenGL and its compatibility: Dolphin Performance Page

Second, there are optional graphics settings enabled for more frame rate heavy games which are not required for Ocarina of Time. Below are some settings to verify if you are experiencing lag and what to uncheck.

Graphical Enhancements

Depending on the power of your computer, you may want to enable some graphics enhancements. If your computer can handle it as it makes games look much nicer. Back on the home page, go to Graphics ⇒ Enhancements. There is no exact guide for what to do here, mouse over each individual component to see what it does. If your computer is powerful enough, you can probably enable most things without worrying about it. Otherwise, you may have to do some trial and error to figure out what your computer can handle. Per-Pixel Lighting and Anti-Aliasing above 4x are particularly demanding. Post-Processing Effects are mostly gimmicks.

Aspect Ratio

Go to Graphics ⇒ General ⇒ Aspect Ratio, and select whatever you prefer.

Troubleshooting

These are common issues with running Dolphin. If you are having issues, try any of these that seem like they may help. If you continue to have problems running the randomizer in Dolphin, please come to #setup-support on our Discord.

The Game is Running Slowly/Less than 20 FPS

The first thing you need to do in this case is look to the top left of your emulation window. There it should display both FPS and VPS. FPS is the framerate of the game you're running, while VPS is the framerate of Dolphin's output. Based on the VPS value, continue to one of the following subsections.

VPS is less than 60 and unstable

If this is the case, your computer can not handle the current emulation, you should turn down some of your graphical enhancements.

VPS is stable at 50

There is likely some issue with the region being stuck at PAL, ensure you took the proper steps regarding the region in Randomizer Dolphin Set Up.

VPS is stable at 60

This one is much trickier, as this implies that, as far as the emulator is concerned, the game is running at full frame rate. The current workaround for this is to go to Config ⇒ Advanced ⇒ Clock Override, checking Enable Emulated CPU Clock Override, and setting the slider to 200% (or whatever number seems to work for you). Note this is not a permanent solution and currently considered a workaround.

The Wii Home Menu Randomly Pops Up

Click on Controllers on the home page and then either untick Background Input (your controller inputs will still be registered with this setting unticked even when the window is unfocused), or change the HOME binding of Wii Remote 1.

GFX FIFO Unknown Opcode on Resetting

This is a known bug with resetting VC on Dolphin. You can click OK on both dialogs that pop up and then won't have to worry about it again until you restart Dolphin itself. You can also go to Options ⇒ Configuration ⇒ Interface and disable Use Panic Handlers to always ignore it.