Racing: Difference between revisions

From OoT Randomizer Wiki
(added a link to the softlocks/crashes wiki page)
m (→‎Racing Rules: link style to make it clear flash carts are for running on N64 but VC and emulators are not)
(27 intermediate revisions by 3 users not shown)
Line 20: Line 20:
If you are joining a community race it is best to set everything up nice and early. Community race rooms are opened 1 hour ahead of time so you have plenty of time to get everything set up before they start. You'll certainly run into issues and it is easier to help you long before the race starts rather than struggling to hurry to fix everything just 5 minutes before everyone has to ready up.
If you are joining a community race it is best to set everything up nice and early. Community race rooms are opened 1 hour ahead of time so you have plenty of time to get everything set up before they start. You'll certainly run into issues and it is easier to help you long before the race starts rather than struggling to hurry to fix everything just 5 minutes before everyone has to ready up.


If you are just playing a pickup race in the [https://discordapp.com/channels/274180765816848384/312609327603122186 #race-planning] channel the people you are racing with should be patient and be able to help you anywhere you get stuck as there is no set starting time there.
If you are just playing a pickup race in one of the race planning channels ({{discord|standard-race-planning}}, {{discord|ddr-race-planning}}, {{discord|rsl-race-planning}}, {{discord|bq-race}}, or {{discord|other-racing-formats}}) the people you are racing with should be patient and be able to help you anywhere you get stuck as there is no set starting time there.


Ensure everything is working before you ready up in the race channel. Get your [[Setup#Emulators|emulator]] or console behaving; get your controller/key bindings set; get your [[Trackers|tracker]] of choice downloaded or installed and learn how to use it. Get everything ready so that you can play all by yourself without outside help.
Ensure everything is working before you ready up in the race channel. Get your [[Setup#Emulators|emulator]] or console behaving; get your controller/key bindings set; get your [[Trackers|tracker]] of choice downloaded or installed and learn how to use it. Get everything ready so that you can play all by yourself without outside help.


'''Note''': [[Retroarch]] and [[Bizhawk]] are the recommended emulators for Ocarina of Time Randomizer. In regards to race participation, Project64 2.x is banned from all official races. If you use Project64 2.x, you '''cannot''' join an official race. Use of all cheats is also prohibited. If you need to use a cheat code to address pause lag in Project64 v1.7 or v1.6, you '''cannot''' join an official race as long as that cheat is active. Use of texture packs to modify the game's appearance is also prohibited by the Ocarina of Time Randomizer community for official races.
'''Note''': [https://wiki.ootrandomizer.com/index.php?title=Project64 Project64 v3.0+], [[Retroarch]] and [[Bizhawk]] are the recommended emulators for Ocarina of Time Randomizer. In regards to race participation, Project64 v2.0, v2.1, v2.2, and v2.3 as well as ModLoader64 are '''not allowed''' for official racing. Use of all cheats is also prohibited. If you need to use a cheat code to address pause lag in Project64 v1.7 or v1.6, you '''cannot''' join an official race as long as that cheat is active. Use of texture packs to modify the game's appearance is also prohibited by the Ocarina of Time Randomizer community for official races.


Get acquainted with your streaming software; get your broadcast settings ready; get your scene layouts the way you want; get your [https://twitch.tv Twitch] channel how you'd like it. You can add Randomizer, Competitive, and/or Speedrun to your Twitch tags on your dashboard to let viewers know what kind of OoT you'll be playing.
Get acquainted with your streaming software; get your broadcast settings ready; get your scene layouts the way you want; get your [https://twitch.tv Twitch] channel how you'd like it. You can add Randomizer, Competitive, and/or Speedrun to your Twitch tags on your dashboard to let viewers know what kind of OoT you'll be playing.
Line 32: Line 32:


=== Create an account ===
=== Create an account ===
Head to the rt.gg website. In the top right corner of the page you should see a <samp>Log in / Create account</samp> button. <kbd><samp>Left-Click</samp></kbd> that button. On the right side is the log in form. You'll use that to log in to your account in the future, after you create it. On the left side is the <samp>Create an account</samp> form. You'll see a link to the [https://racetime.gg/about/faq rt.gg FAQ] and fields for your <samp>Email</samp>, <samp>Name</samp>, and <samp>Password</samp> and its confirmation.
Head to the rt.gg website. In the top right corner of the page you should see a <samp>Log in / Create account</samp> button. {{kbd|Left Click}} that button. On the right side is the log in form. You'll use that to log in to your account in the future, after you create it. On the left side is the <samp>Create an account</samp> form. You'll see a link to the [https://racetime.gg/about/faq rt.gg FAQ] and fields for your <samp>Email</samp>, <samp>Name</samp>, and <samp>Password</samp> and its confirmation.


Fill out these fields. The email address will need to be valid so that you can confirm the account. The name field should be the username you like to go by. Ensure you type the same password into both password fields. At the bottom of both forms is a reCAPTCHA you'll need to interact with to prove you're human. Usually, you can just click the checkbox and that is enough.
Fill out these fields. The email address will need to be valid so that you can confirm the account. The name field should be the username you like to go by. Ensure you type the same password into both password fields. At the bottom of both forms is a reCAPTCHA you'll need to interact with to prove you're human. Usually, you can just click the checkbox and that is enough.


Once you have filled out the form and proven you're not a robot, click <kbd><samp>Create account</samp></kbd>. You should get an email shortly with a link to click to validate your account.
Once you have filled out the form and proven you're not a robot, click {{kbd|Create account}}. You should get an email shortly with a link to click to validate your account.


=== Connect with Twitch ===
=== Connect with Twitch ===
Once you are logged into your rt.gg account, head to the top right of the screen again. <kbd>Left-Click</kbd> the <samp>Settings</samp> button. On this page, select the <kbd><samp>Twitch & connections</samp></kbd> tab, then on the following page press the <kbd><samp>Connect your Twitch.tv account</samp></kbd> button. You'll log into your Twitch account if you're not already, then <kbd><samp>Authorize</samp></kbd> the connection. Your racetime.gg account and your Twitch account are now linked together. You're now ready to join Ocarina of Time Randomizer races.
Once you are logged into your rt.gg account, head to the top right of the screen again. {{kbd|Left Click}} the <samp>Settings</samp> button. On this page, select the {{kbd|Twitch & connections}} tab, then on the following page press the {{kbd|Connect your Twitch.tv account}} button. You'll log into your Twitch account if you're not already, then {{kbd|Authorize}} the connection. Your racetime.gg account and your Twitch account are now linked together. You're now ready to join Ocarina of Time Randomizer races.


=== Joining a Race ===
=== Joining a Race ===
Generally a race room will be provided in [https://discordapp.com/channels/274180765816848384/512053754015645696 #race-announcements] for official races, or [https://discordapp.com/channels/274180765816848384/312609327603122186 #race-planing] for pick-up games and you can just click on that link to be dropped right into the correct room on the website. You can also see active races and races currently waiting for participants on the [https://racetime.gg/ootr Ocarina of Time Randomizer] page on racetime.gg. You'll probably see <samp>Current races</samp> above a bunch of <samp>Past races</samp>. You can generally join any race that is accepting entrants, so click on the one you're interested in joining.
Generally a race room will be provided in one of the announcements channels ({{discord|racing-announcements}}, {{discord|freaky-friday-races}}, {{discord|standard-announcements}}, {{discord|league-announcements}}, {{discord|ddr-announcements}}, {{discord|rsl-announcements}}, {{discord|bq-announcements}}) for official races, or one of the other race planning channels ({{discord|standard-race-planning}}, {{discord|ddr-race-planning}}, {{discord|rsl-race-planning}}, {{discord|bq-race}}, or {{discord|other-racing-formats}}) for pick-up games and you can just click on that link to be dropped right into the correct room on the website. You can also see active races and races currently waiting for participants in the {{discord|current-races}} channel or on the [https://racetime.gg/ootr Ocarina of Time Randomizer] page on racetime.gg You'll probably see <samp>Current races</samp> above a bunch of <samp>Past races</samp>. You can generally join any race that is accepting entrants, so click on the one you're interested in joining.


On the race page, you'll see details of the race, including the goal, a link to the seed page if one has been generated already, and the entrants to the left, and you'll see chat and a timer to the right. Above the timer is a <samp>Join</samp> button. <kbd>Left-Click</kbd> that button to join the race. It will then split into two buttons. <samp>Ready</samp>, which you should click once you have your seed, emulator, and stream set up, and <samp>Quit</samp> which you can click if you decide you don't wish to race. Once you've readied up, a <samp>Not ready</samp> button will appear if you actually aren't ready yet.
On the race page, you'll see details of the race, including the goal, a link to the seed page if one has been generated already, and the entrants to the left, and you'll see chat and a timer to the right. Above the timer is a <samp>Join</samp> button. {{kbd|Left Click}} that button to join the race. It will then split into two buttons. <samp>Ready</samp>, which you should click once you have your seed, emulator, and stream set up, and <samp>Quit</samp> which you can click if you decide you don't wish to race. Once you've readied up, a <samp>Not ready</samp> button will appear if you actually aren't ready yet.


Once the race has been started, the timer will begin to countdown. Once it reaches 0, begin to race. During an active race you have two buttons again. <samp>Done</samp>, which you will press once you finish the seed, and <samp>Forfeit</samp> which you may need to press if you find yourself no longer able to complete the race. Both of these actions can be undone if needed, so don't worry if you accidentally hit one. Just make sure by the end of the race you aren't "Done" when you haven't finished, or that you haven't "Forfeit" if you have actually finished. The very last action you can do after having done one of these is <samp>Add comment</samp> on the race. This will be displayed in a tooltip next to your name and in the chat and is viewable by everyone. Be sure not to leave any spoilers in the comment.
Once the race has been started, the timer will begin to countdown. Once it reaches 0, begin to race. During an active race you have two buttons again. <samp>Done</samp>, which you will press once you finish the seed, and <samp>Forfeit</samp> which you may need to press if you find yourself no longer able to complete the race. Both of these actions can be undone if needed, so don't worry if you accidentally hit one. Just make sure by the end of the race you aren't "Done" when you haven't finished, or that you haven't "Forfeit" if you have actually finished. The very last action you can do after having done one of these is <samp>Add comment</samp> on the race. This will be displayed in a tooltip next to your name and in the chat and is viewable by everyone. Be sure not to leave any spoilers in the comment.


<!-- == SpeedRunsLive ==
== LiveSplit ==
 
SpeedRunsLive is a community based around speedrunning after the popularity of livestreaming took off.
 
=== IRC ===
 
You'll need to get familiar with a fairly old internet chat protocol called IRC to use SpeedRunsLive. IRC requires using an IRC client on your computer to connect to an IRC server. '''IRC does not have accounts'''. You connect using a username, called a ''nick'' or ''nickname''. Only one client can be using this nick at a time. You can reserve a nick for yourself by associating a password with it through the IRC service called NickServ, however this does not remove the "one client at a time" rule. You will have to do this on SRL in order to race, but it is important that you remember this information on how IRC works.
 
We will use the SRL webchat as the IRC client in this guide. Head to [http://www.speedrunslive.com/channel/ the Channel section of SpeedRunsLive].
 
=== Register with NickServ ===
 
On the webchat client, for nickname type the name you want to use for racing. Leave password alone for the moment since you don't have a password yet. Make sure that the nickname you selected is the one you ''really'' want to have as your SRL nickname, to use for all future races. If the following message appears in the Server or the SpeedRunsLive tab of your client it means you will need to choose a different one as someone else already uses this one.
<NickServ>: This nickname is registered and protected.  If it is your
<NickServ>: nick, type /msg NickServ IDENTIFY password.  Otherwise,
<NickServ>: please choose a different nick.
<NickServ>: If you do not change within 20 seconds, I will change your nick.
You will also know if this is a problem if you are renamed to the name TrueSkill with numbers afterward.
 
In the text bar, type <kbd>/msg NickServ REGISTER <var>password</var> <var>email</var></kbd>. Where password is the password you want to use to identify as this the owner of this nick, and email is your actual email address. It is important that this is your real email address if you ever forget your password. This will register the nickname you are currently using to NickServ with the corresponding email and password.
 
Example:
<blockquote>If your email address was GodGamer123@gmail.com and your password was coolestDud3, then you would type this into the text bar at the bottom of the window:
 
[[File:Race 08.png|RTENOTITLE]]</blockquote>
 
When connecting to IRC with the webchat client, you can just enter your password along with your nick to identify with NickServ as the owner of the nickname. If you don't put your password then you will have to identify manually by sending a message to nickserv by typing <kbd>/msg NickServ IDENTIFY <var>password</var></kbd>.
 
=== Set Your Twitch URL ===
 
Type <kbd>.setstream twitch/<var>username</var></kbd> in the '''#speedrunslive''' channel. For our hypothetical GodGamer account, he would type in
 
[[File:Race 12.png|RTENOTITLE]]
 
to let the SRL servers know that this nick broadcasts to that Twitch channel.
 
=== Joining a Race ===
 
Generally a race room will be provided in [https://discordapp.com/channels/274180765816848384/512053754015645696 #race-announcements] for official races, or [https://discordapp.com/channels/274180765816848384/312609327603122186 #race-planing] for pick-up games that looks like ''#srl-t9xbw''. This is the room name for the race. You can join this room by typing <kbd>/join #<var>srl-t9xbw</var></kbd>. Just be sure to use the actual room name and not this one. This is an old race room and won't work for new races.
 
=== Troubleshooting ===
 
==== Nickname Already in Use ====
 
If you haven't set a password yet that means someone else uses this nickname. You will need to choose another one.
 
If you have set a password, remember that you can only be connected with a nickname from one client. You cannot connect with the webchat and LiveSplit at the same time for example. Make sure you are only running the one you want to use for racing. It may take a few seconds after you close a client for the server to realize you disconnected so wait patiently for a second if it still gives you the error after you close the client you aren't using.
 
==== Verify That My Stream Exists ====
 
Apparently if you set your stream on the web for SRL, it doesn't always take in IRC. Verify whether this has happened to you by typing <kbd>.stream <var>nick</var></kbd> using your nick. If it says that the stream doesn't exist, you will need to set it again in IRC. -->


== LiveSplit ==
[[File:Livesplit-race-view.png|thumb|Ensure you are using the latest version of LiveSplit for the best experience. If being in a race does not look like this screenshot, be sure to update.]]


LiveSplit is a convenient Timer program that has racetime.gg integration (as of version 1.8.8). It can be downloaded from [http://livesplit.github.io/downloads/ LiveSplit's GitHub page].
LiveSplit is a convenient Timer program that has racetime.gg integration (as of version 1.8.8). It can be downloaded from [http://livesplit.github.io/downloads/ LiveSplit's GitHub page].


The instruction video linked there is ''very helpful'' and I recommend you check it out to learn a lot more about LiveSplit. <!--This application can be used as your IRC client for SRL so that you don't have to load a web browser for the webchat, or a separate application if you were already using one. Just remember that only one client can be using a nickname at a time.-->
The instruction video linked there is ''very helpful'' and I recommend you check it out to learn a lot more about LiveSplit.  


=== Join a Race ===
=== Join a Race ===
Line 110: Line 60:
With LiveSplit open, right-click within the Timer, select racetime.gg Races, and choose from the available races that are currently accepting Entrants.<!-- OoTR races are labeled under the category "The Legend of Zelda: Ocarina of Time Hacks" on SRL – there are other OoT ROMhacks besides Item Randomizer, so double check with folks if you are uncertain if it is a Rando race.--> On racetime.gg, the Ocarina of Time Randomizer has its own category, so you shouldn't have any confusion.
With LiveSplit open, right-click within the Timer, select racetime.gg Races, and choose from the available races that are currently accepting Entrants.<!-- OoTR races are labeled under the category "The Legend of Zelda: Ocarina of Time Hacks" on SRL – there are other OoT ROMhacks besides Item Randomizer, so double check with folks if you are uncertain if it is a Rando race.--> On racetime.gg, the Ocarina of Time Randomizer has its own category, so you shouldn't have any confusion.


Upon selecting a race to participate in, you will be prompted<!-- with to identify a nick for SRL races, or--> to log into the website for racetime.gg races.
Upon selecting a race to participate in, you will be prompted to log into the website for racetime.gg races.
 
[[File:Livesplit-oauth.png|frameless]]


[[File:Race 15.png|RTENOTITLE]]
== Entering and Readying ==


== Entering, Readying, and Finishing ==
To actually enter a race you'd like to participate in, [[#LiveSplit|Join a Race via LiveSplit]] or [[#Joining a Race|Join a Race on the website if racing on racetime]]. Then, click Enter Race or type {{kbd|.enter}} to join the race.


To actually enter a race you'd like to participate in, [[#LiveSplit|Join a Race via LiveSplit]]<!-- or [[#Joining a Race|Join a Race via IRC if racing on SpeedRunsLive]]--> or [[#Joining a Race 2|Join a Race on the website if racing on racetime]]. <!--Be sure to use the right website for where the race you are joining is hosted. Then, click Enter Race or type <kbd>.enter</kbd> to join the race.
Click the link in the header below the ruleset name for a link to the seed to be used in the race. Note: This is not set too early before a race's start time, to prevent cheating. During Weeklies, for example, the seed is generated (and the link posted) approximately 15 minutes before the scheduled start time of the race.


Type .goal to receive a link to the Patch-File to be used for the race. Note: This is not set too early before a race's start time, to prevent cheating. During Weeklies, for example, the .goal is set (and the link to the Patch-File distributed) approximately 10 minutes before the scheduled start time of the race.-->Then, click Enter Race to join the race.
Race participation requires streaming your run. Be sure to start your broadcast at least 5 minutes before the expected start time of the race. A bot will verify if you are live, and it can take up to 5 minutes for the fact that you are live streaming to become available to that bot. Budget your time accordingly.


Click the link in the header below the ruleset name for a link to the seed to be used in the race. Note: This is not set too early before a race's start time, to prevent cheating. During Weeklies, for example, the seed is generate (and the link posted) approximately 15 minutes before the scheduled start time of the race.
Once you have ''everything'' ready to begin your run, select Ready or type {{kbd|.ready}}. Only do this after you have downloaded the seed, set your file name, had your final bathroom break before the race, gotten your cup of water, etc. Ready means '''ready''', and once everyone has indicated that they are ready, there is a 15 second countdown on racetime.


Race participation requires streaming your run. Be sure to start your broadcast at least 5 minutes before the expected start time of the race. A bot will verify if you are live, and it can take up to 5 minutes for the fact that you are livestreaming to become available to that bot. Budget your time accordingly.
Once the countdown reaches 0, your LiveSplit timer will start automatically, if linked. '''Do not''' start your game file (and load into your house in the forest) before the Timer starts! Do not attempt to Pause your timer during a race, either - LiveSplit will interpret a Pause as completion of the race.


Once you have EVERYTHING ready to begin your run, select Ready<!-- or type <kbd>.ready</kbd>-->. Only do this after you have downloaded the seed, set your file name, had your final bathroom break before the race, gotten your cup of water, etc. Ready means READY, and once everyone has indicated that they are ready, there is a<!-- 10 second countdown on SRL and--> 15 second countdown on racetime.
== Finishing A Race ==


Once the countdown reaches 0, your LiveSplit timer will start automatically, if linked. '''Do Not''' start your game file (and load into your house in the forest) before the Timer starts! Do not attempt to Pause your timer during a race, either - LiveSplit will interpret a Pause as completion of the race.
When you are finished with a race depends on whether the goal is to ''Defeat Ganon'', ''Collect All Triforce Pieces'' in Triforce Hunt, or in casual races some other goal. The timing of finishing for defeating Ganon is the start of cutscene after you press B for the final swing. For Triforce Hunt in the Random Settings League it is once the screen is completely black, and in general Ocarina of Time racing is finished either at the last input or once the item you collected is above your head.


Once you Slay The Pig, stop your timer using whatever keybind you have set for it, or<!-- type <kbd>.done</kbd>--> click Done to complete the race. The exact timing is the start of the cutscene, after you take your final swing at his face. GG!<!--You can look in the Race IRC to see who has finished and with what time(s).--> You can look in the race room to see who has finished and with what time(s).
Once you achieve your goal, stop your timer using whatever keybinding you have set for it, click Done or type {{kbd|.done}} to complete the race. You can look in the race room to see who has finished and with what times.


If something comes up, you can<!-- <kbd>.quit</kbd>--> click Forfeit to forfeit a race. You will lose points and standing on<!-- SRL or--> racetime, but sometimes it can't be avoided. Be aware of the penalties for forfeiting, and try to budget plenty of time for a race.
If something comes up, you can click Forfeit or type {{kbd|.forfeit}} to forfeit a race. You will lose points and standing on racetime, but sometimes it can't be avoided. Be aware of the penalties for forfeiting, and try to budget plenty of time for a race.


If you think you have to quit,<!-- submit <samp>.quit</samp>--> click Forfeit, then realize you were mistaken, you can resume the race (including all the time that has elapsed) by<!-- typing <kbd>.undone</kbd>--> clicking Undo Finish – the race timer will continue and will include the time you thought you were out of the race.
If you think you have to quit, click Forfeit, then realize you were mistaken, you can resume the race (including all the time that has elapsed) by clicking Undo Finish or typing {{kbd|.undone}} – the race timer will continue and will include the time you thought you were out of the race.


== Racing Rules ==
== Racing Rules ==
There are several rules you should be careful to follow while racing.
{{race rule|These are several of the most important rules you must follow while racing.}}
# You must follow the [[Rules]] the current race has chosen to follow. The most common ruleset is [[Standard]], however this is not used for all races. Always confirm which ruleset a race is using if it is not in the race goal.
# You must follow the [[Rules]] the current race has chosen to follow. The most common ruleset is [[Standard]], however this is not used for all races. Always confirm which ruleset a race is using if it is not in the race goal.
# You can play on the Nintendo 64 with a [https://wiki.ootrandomizer.com/index.php?title=Everdrive flash cart], [https://wiki.ootrandomizer.com/index.php?title=Wii_Virtual_Console Wii Virtual Console], or an [https://wiki.ootrandomizer.com/index.php?title=Setup#Emulators emulator]. Project64 v2.0, v2.1, v2.2, and v2.3 as well as ModLoader64 are not allowed for racing. Note that [https://www.pj64-emu.com/nightly-builds Project64 v2.4+] is race-legal.
# You can play on [[Everdrive|the Nintendo 64 with a flash cart]], [[Wii Virtual Console]], or [[Setup#Emulators|Emulators]]. Project64 v2.x, ModLoader64, and Dolphin versions older than Beta 5.0-13963 are not allowed for racing. Note that [https://www.pj64-emu.com/public-releases Project64 v3.0+] is race-legal.
#* If playing on emulator, you must also follow the [[#Emulator Settings Requirements|Emulator Settings Requirements]].
#* If playing on emulator, you must also follow the [[#Emulator Settings Requirements|Emulator Settings Requirements]].
# You may not modify the ROM in any way outside of patching it on the [https://ootrandomizer.com Randomizer website] or the Ocarina of Time Randomizer software on your computer.
# You may not modify the ROM in any way outside of patching it on the [https://ootrandomizer.com Randomizer website] or the Ocarina of Time Randomizer software on your computer.
#* This means changing cosmetics using the randomizer is fine. Adding stuff like models or changing textures is not.
#* This means changing cosmetics using the randomizer is fine. Adding stuff like models or changing textures is not. Editing RAM is also not allowed.
# Generally there are no rules for streaming except that you must do so, however Tournament races often have additional requirements.
# Generally there are no rules for streaming except that you must do so, however Tournament races often have additional requirements.
# Spoilers should only be discussed in the [https://discordapp.com/channels/274180765816848384/291655374644183041 #results] channel on the Discord. Do not discuss them in other Discord channels or the race chat channel, and do not put them in race comments.
# Spoilers should only be discussed in the relevant "results" channels on the Discord. Do not discuss them in other Discord channels or the race chat channel, and do not put them in race comments.


''The restreaming team also requests that if you use custom music, you try to keep it to only Zelda tracks if they ask you if you want to be restreamed''.
''The restreaming team also requests that if you use custom music, you try to keep it to only Zelda tracks if they ask you if you want to be restreamed''.


== Emulator Settings Requirements ==
== Emulator Settings Requirements ==
{{race rule|These settings are either useful for identifying a cheater, or preventing an emulator from exceeding the capabilities of the actual Nintendo 64}}
Playing on an emulator for races requires a little bit more setup. Namely, you need to enable an FPS display. If you cannot provide this, you are required to capture the entire emulator window. '''Texture packs are not allowed during races'''.
Playing on an emulator for races requires a little bit more setup. Namely, you need to enable an FPS display. If you cannot provide this, you are required to capture the entire emulator window. '''Texture packs are not allowed during races'''.


=== BizHawk ===
=== BizHawk ===
To enable the FPS display, go to <kbd><samp>View</samp> ⇒ <samp>Display FPS</samp></kbd>. You can configure it further in <kbd><samp>Config</samp> ⇒ <samp>Messages</samp></kbd>.
To enable the FPS display, go to {{kbd|View|Display FPS}}. You can configure it further in {{kbd|Config|Messages}}.


=== Project64 ===
=== Project64 ===


To enable the FPS Display (shown as DL/s), launch Project64 and load your ROM. Next, navigate to <kbd><samp>Options</samp> ⇒ <samp>Settings...</samp></kbd> or press <kbd><samp>Ctrl+T</samp></kbd> to open the Settings menu.
To enable the FPS Display (shown as DL/s), launch Project64 and load your ROM. Next, navigate to {{kbd|Options|Settings...}} or press {{kbd|Ctrl+T}} to open the Settings menu.


In the Settings menu, expand the <samp>Options</samp> list on the left-hand side and look for an <samp>Advanced</samp> section. If the <samp>Advanced</samp> section isn't showing, click <samp>Options</samp> and untick <samp>Hide advanced settings</samp>. Afterwards, click <samp>Advanced</samp> and tick the <samp>Speed Display</samp>. The <samp>Speed Display</samp> box must show <samp>VI/s & DL/s</samp>. Click <samp>Apply</samp>.  
In the Settings menu, expand the <samp>Options</samp> list on the left-hand side and look for an <samp>Advanced</samp> section. If the <samp>Advanced</samp> section isn't showing, click <samp>Options</samp> and untick <samp>Hide advanced settings</samp>. Afterwards, click <samp>Advanced</samp> and tick the <samp>Speed Display</samp>. The <samp>Speed Display</samp> box must show <samp>VI/s & DL/s</samp>. Click <samp>Apply</samp>.  
Line 160: Line 113:
'''Lowering the VI refresh rate to 1488 is also required for racing with Project64.'''
'''Lowering the VI refresh rate to 1488 is also required for racing with Project64.'''


While in the Settings menu, look for a <samp>Defaults</samp> section. If the <samp>Defaults</samp> section isn't showing, click <samp>Options</samp> and untick <samp>Hide advanced settings</samp>. Afterwards, click <samp>Defaults</samp> and change the <samp>VI refresh rate</samp> from <samp>1500</samp> to <samp>1488</samp>. Click <samp>Apply</samp>.  
While in the Settings menu, look for a <samp>Defaults</samp> section. If the <samp>Defaults</samp> section isn't showing, click {{kbd|Options}} and untick {{kbd|Hide advanced settings}}. Afterwards, click {{kbd|Defaults}} and change the <samp>VI refresh rate</samp> from <samp>1500</samp> to {{kbd|1488}}. Click {{kbd|Apply}}.  


Finally, in the Settings menu, click on <samp>Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer).</samp> Your <samp>VI refresh rate</samp> should display <samp>1488</samp>. If not, change it accordingly and click <samp>Apply</samp>
Finally, in the Settings menu, click on {{kbd|Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer).}} Your <samp>VI refresh rate</samp> should display <samp>1488</samp>. If not, change it accordingly and click {{kbd|Apply}}


Keep in mind that '''you must show your VI Refresh Rate''' in both the <samp>Defaults</samp> section and the <samp>Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer)</samp> section '''before the race starts'''.
Keep in mind that '''you must show your VI Refresh Rate''' in both the <samp>Defaults</samp> section and the <samp>Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer)</samp> section '''before the race starts'''.
==== Allowed Versions ====
{{race rule|Older versions of Project 64 have problematic settings, either overclocking by default or just don't work right with Ocarina of Time Randomizer}}
The allowed versions of Project 64 are version 3.0 and newer stable versions.


=== RetroArch ===
=== RetroArch ===
To enable the FPS display, go to <kbd><samp>Settings</samp> ⇒ <samp>On-Screen Display</samp> ⇒ <samp>On-Screen Notifications</samp></kbd> and switch <samp>On-Screen Notifications</samp> to <kbd>ON</kbd> if it is not already. Then, change <samp>Display Framerate</samp> to <kbd>ON</kbd>.
To enable the FPS display, go to {{kbd|Settings|On-Screen Display|On-Screen Notifications}} and switch <samp>On-Screen Notifications</samp> to {{kbd|ON}} if it is not already. Then, change <samp>Display Framerate</samp> to {{kbd|ON}}.
 
You must also show that you are using the <samp>Framerate</samp> option {{kbd|original}}, as well as having the <samp>VI Refresh (Overclock)</samp> option set to {{kbd|auto}}, before a race starts. To do this, press {{kbd|F1}} to open the <samp>Quick Menu</samp> and choose {{kbd|Options}} and scroll down to the <samp>Framerate</samp> option. This is required for the Mupen64plus Next core and the ParaLLEl core. If you are using the old mupen64plus core, this option will not appear and the text in the bottom left that displays what core you are using will be proof that you are following this rule.
 
=== Dolphin ===
To enable the frame display, go the settings under {{kbd|Options|Graphics Settings|General}} and check the box which says Show FPS.
Refer to the [[Dolphin|Dolphin]] for setup help to make sure your settings are race legal.
Be aware that you need to show your settings menu to prove that your {{kbd|Speed Limit}} setting is set to 100% and that your {{kbd|Clock Override}} setting is disabled.
 
==== Allowed Versions ====
{{race rule|Older versions of Dolphin did not emulate loading the ROM from the WAD properly and skipped the Classic Controller text}}
 
The allowed versions of Dolphin are Beta 5.0-13963 and newer. The newest beta is almost always recommended.


You must also show that you are using the <samp>Framerate</samp> option <kbd>original</kbd>, as well as having the <samp>VI Refresh (Overclock)</samp> option set to <kbd>auto</kbd>, before a race starts. To do this, press <kbd>F1</kbd> to open the <samp>Quick Menu</samp> and choose <kbd><samp>Options</samp></kbd> and scroll down to the <samp>Framerate</samp> option. This is required for the Mupen64plus Next core and the ParaLLEl core. If you are using the old mupen64plus core, this option will not appear and the text in the bottom left that displays what core you are using will be proof that you are following this rule.
[[Category:Racing Rules]]

Revision as of 07:47, 16 February 2022

by LostThePirate

This guide will help you get set up for your first race.

Community races and many privately organized races use racetime.gg. Previously SpeedRunsLive was used, and some people still organize races there, but the community has largely transitioned away from it.

Races can be joined using LiveSplit or through the racetime website. If using LiveSplit, make sure you can log into racetime quickly should LiveSplit fail to load a race channel or crash in the middle of a race.

We have compiled a list of known softlocks and crashes (WIP). It is recommended to read it through to potentially save you from frustration later.

Before You Ready Up

Please read the Rules and be familiar with the allowed and banned techniques for the particular ruleset of the race beforehand.

If you are joining a community race it is best to set everything up nice and early. Community race rooms are opened 1 hour ahead of time so you have plenty of time to get everything set up before they start. You'll certainly run into issues and it is easier to help you long before the race starts rather than struggling to hurry to fix everything just 5 minutes before everyone has to ready up.

If you are just playing a pickup race in one of the race planning channels (#standard-race-planning, #ddr-race-planning, #rsl-race-planning, #bq-race, or #other-racing-formats) the people you are racing with should be patient and be able to help you anywhere you get stuck as there is no set starting time there.

Ensure everything is working before you ready up in the race channel. Get your emulator or console behaving; get your controller/key bindings set; get your tracker of choice downloaded or installed and learn how to use it. Get everything ready so that you can play all by yourself without outside help.

Note: Project64 v3.0+, Retroarch and Bizhawk are the recommended emulators for Ocarina of Time Randomizer. In regards to race participation, Project64 v2.0, v2.1, v2.2, and v2.3 as well as ModLoader64 are not allowed for official racing. Use of all cheats is also prohibited. If you need to use a cheat code to address pause lag in Project64 v1.7 or v1.6, you cannot join an official race as long as that cheat is active. Use of texture packs to modify the game's appearance is also prohibited by the Ocarina of Time Randomizer community for official races.

Get acquainted with your streaming software; get your broadcast settings ready; get your scene layouts the way you want; get your Twitch channel how you'd like it. You can add Randomizer, Competitive, and/or Speedrun to your Twitch tags on your dashboard to let viewers know what kind of OoT you'll be playing.

racetime.gg

racetime.gg is a modern, sleek and user-friendly system that lets anyone and everyone race video games online, and is an open source, community driven site.

Create an account

Head to the rt.gg website. In the top right corner of the page you should see a Log in / Create account button. Left Click that button. On the right side is the log in form. You'll use that to log in to your account in the future, after you create it. On the left side is the Create an account form. You'll see a link to the rt.gg FAQ and fields for your Email, Name, and Password and its confirmation.

Fill out these fields. The email address will need to be valid so that you can confirm the account. The name field should be the username you like to go by. Ensure you type the same password into both password fields. At the bottom of both forms is a reCAPTCHA you'll need to interact with to prove you're human. Usually, you can just click the checkbox and that is enough.

Once you have filled out the form and proven you're not a robot, click Create account. You should get an email shortly with a link to click to validate your account.

Connect with Twitch

Once you are logged into your rt.gg account, head to the top right of the screen again. Left Click the Settings button. On this page, select the Twitch & connections tab, then on the following page press the Connect your Twitch.tv account button. You'll log into your Twitch account if you're not already, then Authorize the connection. Your racetime.gg account and your Twitch account are now linked together. You're now ready to join Ocarina of Time Randomizer races.

Joining a Race

Generally a race room will be provided in one of the announcements channels (#racing-announcements, #freaky-friday-races, #standard-announcements, #league-announcements, #ddr-announcements, #rsl-announcements, #bq-announcements) for official races, or one of the other race planning channels (#standard-race-planning, #ddr-race-planning, #rsl-race-planning, #bq-race, or #other-racing-formats) for pick-up games and you can just click on that link to be dropped right into the correct room on the website. You can also see active races and races currently waiting for participants in the #current-races channel or on the Ocarina of Time Randomizer page on racetime.gg You'll probably see Current races above a bunch of Past races. You can generally join any race that is accepting entrants, so click on the one you're interested in joining.

On the race page, you'll see details of the race, including the goal, a link to the seed page if one has been generated already, and the entrants to the left, and you'll see chat and a timer to the right. Above the timer is a Join button. Left Click that button to join the race. It will then split into two buttons. Ready, which you should click once you have your seed, emulator, and stream set up, and Quit which you can click if you decide you don't wish to race. Once you've readied up, a Not ready button will appear if you actually aren't ready yet.

Once the race has been started, the timer will begin to countdown. Once it reaches 0, begin to race. During an active race you have two buttons again. Done, which you will press once you finish the seed, and Forfeit which you may need to press if you find yourself no longer able to complete the race. Both of these actions can be undone if needed, so don't worry if you accidentally hit one. Just make sure by the end of the race you aren't "Done" when you haven't finished, or that you haven't "Forfeit" if you have actually finished. The very last action you can do after having done one of these is Add comment on the race. This will be displayed in a tooltip next to your name and in the chat and is viewable by everyone. Be sure not to leave any spoilers in the comment.

LiveSplit

Ensure you are using the latest version of LiveSplit for the best experience. If being in a race does not look like this screenshot, be sure to update.

LiveSplit is a convenient Timer program that has racetime.gg integration (as of version 1.8.8). It can be downloaded from LiveSplit's GitHub page.

The instruction video linked there is very helpful and I recommend you check it out to learn a lot more about LiveSplit.

Join a Race

With LiveSplit open, right-click within the Timer, select racetime.gg Races, and choose from the available races that are currently accepting Entrants. On racetime.gg, the Ocarina of Time Randomizer has its own category, so you shouldn't have any confusion.

Upon selecting a race to participate in, you will be prompted to log into the website for racetime.gg races.

Entering and Readying

To actually enter a race you'd like to participate in, Join a Race via LiveSplit or Join a Race on the website if racing on racetime. Then, click Enter Race or type .enter to join the race.

Click the link in the header below the ruleset name for a link to the seed to be used in the race. Note: This is not set too early before a race's start time, to prevent cheating. During Weeklies, for example, the seed is generated (and the link posted) approximately 15 minutes before the scheduled start time of the race.

Race participation requires streaming your run. Be sure to start your broadcast at least 5 minutes before the expected start time of the race. A bot will verify if you are live, and it can take up to 5 minutes for the fact that you are live streaming to become available to that bot. Budget your time accordingly.

Once you have everything ready to begin your run, select Ready or type .ready. Only do this after you have downloaded the seed, set your file name, had your final bathroom break before the race, gotten your cup of water, etc. Ready means ready, and once everyone has indicated that they are ready, there is a 15 second countdown on racetime.

Once the countdown reaches 0, your LiveSplit timer will start automatically, if linked. Do not start your game file (and load into your house in the forest) before the Timer starts! Do not attempt to Pause your timer during a race, either - LiveSplit will interpret a Pause as completion of the race.

Finishing A Race

When you are finished with a race depends on whether the goal is to Defeat Ganon, Collect All Triforce Pieces in Triforce Hunt, or in casual races some other goal. The timing of finishing for defeating Ganon is the start of cutscene after you press B for the final swing. For Triforce Hunt in the Random Settings League it is once the screen is completely black, and in general Ocarina of Time racing is finished either at the last input or once the item you collected is above your head.

Once you achieve your goal, stop your timer using whatever keybinding you have set for it, click Done or type .done to complete the race. You can look in the race room to see who has finished and with what times.

If something comes up, you can click Forfeit or type .forfeit to forfeit a race. You will lose points and standing on racetime, but sometimes it can't be avoided. Be aware of the penalties for forfeiting, and try to budget plenty of time for a race.

If you think you have to quit, click Forfeit, then realize you were mistaken, you can resume the race (including all the time that has elapsed) by clicking Undo Finish or typing .undone – the race timer will continue and will include the time you thought you were out of the race.

Racing Rules

This is an important racing rule! If you do not follow it, you may be disqualified from a race.

Reason: These are several of the most important rules you must follow while racing.

  1. You must follow the Rules the current race has chosen to follow. The most common ruleset is Standard, however this is not used for all races. Always confirm which ruleset a race is using if it is not in the race goal.
  2. You can play on the Nintendo 64 with a flash cart, Wii Virtual Console, or Emulators. Project64 v2.x, ModLoader64, and Dolphin versions older than Beta 5.0-13963 are not allowed for racing. Note that Project64 v3.0+ is race-legal.
  3. You may not modify the ROM in any way outside of patching it on the Randomizer website or the Ocarina of Time Randomizer software on your computer.
    • This means changing cosmetics using the randomizer is fine. Adding stuff like models or changing textures is not. Editing RAM is also not allowed.
  4. Generally there are no rules for streaming except that you must do so, however Tournament races often have additional requirements.
  5. Spoilers should only be discussed in the relevant "results" channels on the Discord. Do not discuss them in other Discord channels or the race chat channel, and do not put them in race comments.

The restreaming team also requests that if you use custom music, you try to keep it to only Zelda tracks if they ask you if you want to be restreamed.

Emulator Settings Requirements

This is an important racing rule! If you do not follow it, you may be disqualified from a race.

Reason: These settings are either useful for identifying a cheater, or preventing an emulator from exceeding the capabilities of the actual Nintendo 64

Playing on an emulator for races requires a little bit more setup. Namely, you need to enable an FPS display. If you cannot provide this, you are required to capture the entire emulator window. Texture packs are not allowed during races.

BizHawk

To enable the FPS display, go to View ⇒ Display FPS. You can configure it further in Config ⇒ Messages.

Project64

To enable the FPS Display (shown as DL/s), launch Project64 and load your ROM. Next, navigate to Options ⇒ Settings... or press Ctrl+T to open the Settings menu.

In the Settings menu, expand the Options list on the left-hand side and look for an Advanced section. If the Advanced section isn't showing, click Options and untick Hide advanced settings. Afterwards, click Advanced and tick the Speed Display. The Speed Display box must show VI/s & DL/s. Click Apply.

Lowering the VI refresh rate to 1488 is also required for racing with Project64.

While in the Settings menu, look for a Defaults section. If the Defaults section isn't showing, click Options and untick Hide advanced settings. Afterwards, click Defaults and change the VI refresh rate from 1500 to 1488. Click Apply.

Finally, in the Settings menu, click on Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer). Your VI refresh rate should display 1488. If not, change it accordingly and click Apply

Keep in mind that you must show your VI Refresh Rate in both the Defaults section and the Config: The Legend of Zelda - Ocarina of Time (U) (Randomizer) section before the race starts.

Allowed Versions

This is an important racing rule! If you do not follow it, you may be disqualified from a race.

Reason: Older versions of Project 64 have problematic settings, either overclocking by default or just don't work right with Ocarina of Time Randomizer

The allowed versions of Project 64 are version 3.0 and newer stable versions.

RetroArch

To enable the FPS display, go to Settings ⇒ On-Screen Display ⇒ On-Screen Notifications and switch On-Screen Notifications to ON if it is not already. Then, change Display Framerate to ON.

You must also show that you are using the Framerate option original, as well as having the VI Refresh (Overclock) option set to auto, before a race starts. To do this, press F1 to open the Quick Menu and choose Options and scroll down to the Framerate option. This is required for the Mupen64plus Next core and the ParaLLEl core. If you are using the old mupen64plus core, this option will not appear and the text in the bottom left that displays what core you are using will be proof that you are following this rule.

Dolphin

To enable the frame display, go the settings under Options ⇒ Graphics Settings ⇒ General and check the box which says Show FPS. Refer to the Dolphin for setup help to make sure your settings are race legal. Be aware that you need to show your settings menu to prove that your Speed Limit setting is set to 100% and that your Clock Override setting is disabled.

Allowed Versions

This is an important racing rule! If you do not follow it, you may be disqualified from a race.

Reason: Older versions of Dolphin did not emulate loading the ROM from the WAD properly and skipped the Classic Controller text

The allowed versions of Dolphin are Beta 5.0-13963 and newer. The newest beta is almost always recommended.